HP Manager Software manual Output for display port status, WX1200# display port status

display port status 71

Examples — The following command displays information for all ports on a WX1200 switch:

WX1200# display port status		Oper Config	Actual	Type	Media
Port Name	Admin

===============================================================================

1	1	up	up	auto	100/full	network	10/100BaseTx
2	2	up	up	auto	100/full	ap	10/100BaseTx
3	3	up	up	auto	100/full	network	10/100BaseTx
4	4	up	down	auto		network	10/100BaseTx
5	5	up	down	auto		network	10/100BaseTx
6	6	up	down	auto		network	10/100BaseTx
7	7	up	down	auto		network	10/100BaseTx
8	8	up	down	auto		network	10/100BaseTx

Table 14 describes the fields in this display.

Table 14 Output for display port status

Field	Description
Port	Port number.
Name	Port name. If the port does not have a name, the
	port number is listed.
Admin	Administrative status of the port:
	„ up — The port is enabled.
	„ down — The port is disabled.
Oper	Operational status of the port:
	„ up — The port is operational.
	„ down — The port is not operational.
Config	Port speed configured on the port:
	„ 10 — 10 Mbps.
	„ 100 — 100 Mbps.
	„ 1000 — 1000 Mbps.
	„ auto — The port sets its own speed.
Actual	Speed and operating mode in effect on the port.
Type	Port type:
	„ ap — MAP access point port
	„ network — Network port
	„ wa — Wired authentication port