display {ap dap} config 277

display {ap dap} Displays global and radio-specific settings for an MAP access point. config

Syntax — display ap config [port-list[radio {1 2}]]

Syntax — display dap config [dap-num[radio {1 2}]]

„port-list— List of ports connected to the MAP access point(s) for which to display configuration settings.

„dap-num— Number of a Distributed MAP for which to display configuration settings.

„radio 1 — Shows configuration information for radio 1.

„radio 2 — Shows configuration information for radio 2. (This option does not apply to single-radio models.)

Defaults — None.

Access — All.

History —Introduced in MSS Version 3.0.

Usage — MSS lists information separately for each MAP access point.

Examples — The following example shows configuration information for an MAP access point on WX port 2:

WX1200# display ap config 2

Port 1: AP model: AP2750, POE: enable, bias: high, name: MAP01 boot-download-enable: YES

load balancing group: none

Radio 1: type: 802.11g, mode: enabled, channel: dynamic

tx pwr: dynamic, profile: default

auto-tune max-power: default, min-client-rate: 5.5, max-retransmissions: 10

The following example shows configuration information for a Distributed

MAP access point configured on connection 1:

WX4400# display dap config 1

Dap 1: Serial-Id: M9DE48B012F00, MAP model: AP2750, bias: high, name: DAP1 boot-download-enable: YES

Radio 1: type: 802.11a, mode: disabled, channel: dynamic

tx pwr: 11, profile: default

auto-tune max-power: default, min-client-rate: 24, max-retransmissions: 10

Table 52 describes the fields in this display.