HP Manager Software manual Describes the fields in the display port-group output

68CHAPTER 4: PORT COMMANDS

Table 11 describes the fields in the display port-group output.

Table 11 Output for display port-group

Field	Description
Port group	Name and state (enabled or disabled) of the port
	group.
Ports	Ports contained in the port group.

See Also

„clear port-groupon page 63

„set port-groupon page 81

display port poe Displays status information for ports on which Power over Ethernet (PoE) is enabled.

Syntax — display port poe [port-list]

„port-list— List of physical ports. If you do not specify a port list, PoE information is displayed for all ports.

Defaults — None.

Access — All.

History — Introduced in MSS Version 3.0.

Examples — The following command displays PoE information for all ports on a WX1200 switch:

WX1200# display port poe		PoE	PoE
Link	Port			Draw
Port Name	Status	Type	config

============================================================

1	1	up	-	disabled	off
2	2	down	-	disabled	off
3	3	down	-	disabled	off
4	4	down	MAP	enabled	1.44
5	5	down	-	disabled	off
6	6	down	-	disabled	off

Table 12 describes the fields in this display.