HP Manager Software manual Wep-rekey, See Also „ display dot1x on „ clear dot1x tx-periodon

set dot1x wep-rekey 495

Examples — Type the following command to set the number of seconds before the WX switch retransmits an EAPoL packet to 300:

WX4400# set dot1x tx-period 300 success: dot1x tx-period set to 300.

See Also

„display dot1x on page 483

„clear dot1x tx-periodon page 483

set dot1x	Enables or disables Wired Equivalency Privacy (WEP) rekeying for
wep-rekey	broadcast and multicast encryption keys.

Syntax — set dot1X wep-rekey {enable disable}

„enable — Causes the broadcast and multicast keys for WEP to be rotated at an interval set by the set dot1x wep-rekey-period for each radio, associated VLAN, and encryption type. The WX generates the new broadcast and multicast keys and pushes the keys to the clients via EAPoL key messages.

„disable — WEP broadcast and multicast keys are never rotated.

Defaults — WEP key rotation is enabled, by default.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — Reauthentication is not required for WEP key rotation to take place. Broadcast and multicast keys are always rotated at the same time, so all members of a given radio, VLAN, or encryption type receive the new keys at the same time.

Examples — Type the following command to disable WEP key rotation:

WX4400# set dot1x wep-rekey disable success: wep rekeying disabled

See Also

„display dot1x on page 483

„set dot1x wep-rekey-periodon page 496