HP Manager Software manual Trailing 000000 value is required, Syntax display rfdetect attack-list

534CHAPTER 17: RF DETECTION COMMANDS

Usage — The permitted vendor list applies only to the WX switch on which the list is configured. WX switches do not share permitted vendor lists.

Examples — The following command adds an entry for clients whose

MAC addresses start with aa:bb:cc:

WX-1200# set rfdetect vendor-list client aa:bb:cc:00:00:00 success: MAC aa:bb:cc:00:00:00 is now in client vendor-list.

The trailing 00:00:00 value is required.

See Also

„clear rfdetect vendor-liston page 515

„display rfdetect vendor-liston page 525

display rfdetect	Displays information about the MAC addresses in the attack list.
attack-list	Syntax — display rfdetect attack-list
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 4.0.
	Examples — The following example shows the attack list on WX switch:
	WX1200# display rfdetect attack-list
	Total number of entries: 1		RSSI	SSID
	Attacklist MAC	Port/Radio/Chan
	11:22:33:44:55:66-----------------	----------------- ------		------------
		dap 2/1/11	-53	rogue-ssid

See Also

„clear rfdetect attack-liston page 512

„set rfdetect attack-liston page 528