HP Manager Software manual See Also „ display log buffer on

set rfdetect log 531

	Examples — The following command configures MSS to ignore BSSID
	aa:bb:cc:11:22:33 during RF scans:
	WX1200# set rfdetect ignore aa:bb:cc:11:22:33
	success: MAC aa:bb:cc:11:22:33 is now ignored.
	See Also
	„ clear rfdetect ignore on page 513
	„ display rfdetect ignore on page 520
set rfdetect log	Disables or reenables generation of log messages when rogues are
	detected or when they disappear.
	Syntax — set rfdetect log {enable disable}
	„ enable — Enables logging of rogues.
	„ disable — Disables logging of rogues.
	Defaults — RF detection logging is enabled by default.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	The log messages for rogues are generated only on the seed and appear
	only in the seed’s log message buffer. Use the display log buffer
	command to display the messages in the seed switch’s log message
	buffer.
	Examples — The following command enables RF detection logging for
	the Mobility Domain managed by this seed switch:
	WX1200# set rfdetect log enable
	success: rfdetect logging is enabled.

See Also

„display log buffer on page 582