HP Manager Software manual Set vlan name, See Also „ display fdb agingtime on

set vlan name 109

Defaults — The aging timeout period is 300 seconds (5 minutes).

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — The following command changes the aging timeout period to 600 seconds for entries that match VLAN orange:

WX4400# set fdb agingtime orange age 600 success: change accepted.

See Also

„display fdb agingtime on page 101

set vlan name Creates a VLAN and assigns a number and name to it.

Syntax — set vlan vlan-numname name

„vlan-num— VLAN number. You can specify a number from 2 through 4095.

„name — String up to 16 alphabetic characters long.

Defaults — VLAN 1 is named default by default. No other VLANs have default names.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — You must assign a name to a VLAN (other than the default

VLAN) before you can add ports to the VLAN.

3Com recommends that you do not use the name default. This name is already used for VLAN 1. 3Com also recommends that you do not rename the default VLAN.

You cannot use a number as the first character in a VLAN name. 3Com recommends that you do not use the same name with different capitalizations for VLANs. For example, do not configure two separate VLANs with the names red and RED.