HP Manager Software manual Cipher-wep40

set service-profile cipher-wep40 359

	See Also
	„ set service-profilecipher-ccmpon page 356
	„ set service-profilecipher-tkipon page 357
	„ set service-profilecipher-wep40on page 359
	„ set service-profile wep key-indexon page 369
	„ set service-profilewpa-ieon page 370
set service-profile	Enables dynamic Wired Equivalent Privacy (WEP) with 40-bit keys, in a
cipher-wep40	service profile.
	Syntax — set service-profile name cipher-wep40 {enable
	disable}
	„ name — Service profile name.
	„ enable — Enables 40-bit WEP encryption for WPA clients.
	„ disable — Disables 40-bit WEP encryption for WPA clients.
	Defaults — 40-bit WEP encryption is disabled by default.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — To use 40-bit WEP with WPA clients, you must also enable the
	WPA IE.
	When 40-bit WEP in WPA is enabled in the service profile, radios
	managed by a radio profile that is mapped to the service profile can also
	support non-WPA clients that use dynamic WEP.
	To support WPA clients that use 104-bit dynamic WEP, you must enable
	WEP with 104-bit keys in the service profile. Use the set service-profile
	cipher-wep104 command.
	Microsoft Windows XP does not support WEP with WPA. To configure a
	service profile to provide dynamic WEP for XP clients, leave WPA disabled
	and use the set service-profile wep commands.
	To support non-WPA clients that use static WEP, you must configure
	static WEP keys. Use the set service-profile wep key-index command.