HP Manager Software manual See Also „ clear mac-usergroup attr on „ display aaa on

set mobility-profile 253

Examples — The following command creates the MAC user group eastcoasters and assigns the group members to VLAN orange:

WX4400# set mac-usergroup eastcoasters attr vlan-name orange success: change accepted.

See Also

„clear mac-usergroup attr on page 212

„display aaa on page 217

set mobility-profileCreates a Mobility Profile and specifies the MAP access point and/or wired authentication ports on the WX switch through which any user assigned to the profile is allowed access.

Syntax — set mobility-profile name name {port {none all

port-list}} {dap {none all dap-num}}

„name — Name of the Mobility Profile. Specify up to 32 alphanumeric characters, with no spaces.

„none — Prevents any user to whom this profile is assigned from accessing any MAP access point or wired authentication port on the WX switch.

„all — Allows any user to whom this profile is assigned to access all MAP access ports and wired authentication port on the WX switch.

„port-list— List of MAP access ports or wired authentication ports through which any user assigned this profile is allowed access. The same port can be used in multiple Mobility Profile port lists.

„dap-num— List of Distributed MAP connections through which any user assigned this profile is allowed access. The same Distributed MAP can be used in multiple Mobility Profile port lists.

Defaults — No default Mobility Profile exists on the WX switch. If you do not assign Mobility Profile attributes, all users have access through all ports, unless denied access by other AAA servers or by access control lists (ACLs).

Access — Enabled.

History —Introduced in MSS Version 3.0.