HP Manager Software manual Tx-period, Display dot1x, „ set dot1x tx-periodon

	clear dot1x tx-period 483
clear dot1x	Resets to the default setting the number of seconds that must elapse
tx-period	before the WX switch retransmits an EAP over LAN (EAPoL) packet.
	Syntax — clear dot1x tx-period
	Defaults — The default is 5 seconds.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — Type the following command to reset the EAPoL
	retransmission time:
	WX4400# clear dot1x tx-period
	success: change accepted.
	See Also
	„ display dot1x on page 483
	„ set dot1x tx-periodon page 494
display dot1x	Displays 802.1X client information for statistics and configuration
	settings.
	Syntax — display dot1x {clients stats config}
	„ clients — Displays information about active 802.1X clients,
	including client name, MAC address, and state.
	„ stats — Displays global 802.1X statistics associated with connecting
	and authenticating.
	„ config — Displays a summary of the current configuration.
	Defaults — None.
	Access — Enabled.