HP Manager Software Describes the fields in this display, Output of display snmp configuration

display snmp configuration 137

CounterMeasureStopTrapsYES

ClientDot1xFailureTrapsYES

Community	Access	Community Name
read-----------------only		--------------
		public
read-write		private

Table 34 describes the fields in this display.

Table 34 Output of display snmp configuration

Field	Description
Snmp agent is	State of the SNMP agent on the WX switch:
	„	Enabled
	„	Disabled
System Name	String configured by the set system name command.
System location	String configured by the set system location command.
System contact	String configured by the set system contact command.
System description	WX switch model.
Trap Receiver	IP address of each trap receiver.
Trap Name	SNMP traps supported by MSS.
Enabled	State of each trap:
	„	Yes
	„	No
Community Access	Type of access for an SNMP community.

See Also

„set ip snmp server on page 152

„set port trap on page 86

„set snmp community on page 160

„set snmp profile on page 167

„set snmp notify target on page 162

„set system contact on page 54

„set system location on page 58

„set system name on page 58