HP Manager Software Service-profile, Displays service profile information, Profile wpaclients

302CHAPTER 9: MANAGED ACCESS POINT COMMANDS

display	Displays service profile information.
service-profile	Syntax — display service-profile {name ?}
	„ name — Displays information about the named service profile.
	„ ? — Displays a list of service profiles.
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — The following command displays information for service
	profile wpa_clients:
	WX4400# display service-profile wpa_clients			crypto
	ssid-name:	private	ssid-type:
	beacon:	yes	auth-fallthru:	web-portal
	WEP Key 1 value:	<none>	WEP Key 2 value:		<none>
	WEP Key 3 value:	<none>	WEP Key 4 value:		<none>
	WEP Unicast Index:	1	WEP Multicast Index:		1
	Shared Key Auth:	NO
	WPA enabled:
	ciphers: cipher-tkip

authentication: 802.1X

TKIP countermeasures time: 60000ms

Table 64 describes the fields in this display.

Table 64 Output for display service-profile

Field	Description
ssid-name	Service set identifier (SSID) managed by this service profile.
ssid-type	SSID type:
	„ crypto — Wireless traffic for the SSID is encrypted.
	„ clear — Wireless traffic for the SSID is unencrypted.
beacon	Indicates whether the radio sends beacons, to advertise the
	SSID:
	„	no
	„	yes