HP Manager Software Examples The following command enables STP on all VLANs, An indirect link

set spantree backbonefast 389

	Examples — The following command enables STP on all VLANs
	configured on a WX switch:
	WX4400# set spantree enable
	success: change accepted.
	The following command disables STP on VLAN burgundy:
	WX4400# set spantree disable vlan burgundy
	success: change accepted.
	See Also
	„ display spantree on page 376
set spantree	Enables or disables STP backbone fast convergence on a wireless LAN
backbonefast	switch. This feature accelerates a port’s recovery following the failure of
	an indirect link.
	CAUTION: The backbone fast convergence feature is not compatible
	with switches that are running standard IEEE 802.1D Spanning Tree
	implementations. This includes switches running Rapid Spanning Tree or
	Multiple Spanning Tree.

Syntax — set spantree backbonefast {enable disable}

„enable — Enables backbone fast convergence.

„disable — Disables backbone fast convergence.

Defaults — STP backbone fast path convergence is disabled by default.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — If you plan to use the backbone fast convergence feature, you must enable it on all the bridges in the spanning tree.

Examples — The following command enables backbone fast convergence:

WX4400# set spantree backbonefast enable success: change accepted.