HP Manager Software manual RFC 1305, Network Time Protocol Version 3 Specification, NTP server

set ntp update-interval 159

	History —Introduced in MSS Version 3.0.
	Usage — You can configure up to three NTP servers. MSS queries all the
	servers and selects the best response based on the method described in
	RFC 1305, Network Time Protocol (Version 3) Specification,
	Implementation and Analysis.
	To use NTP, you also must enable the NTP client with the set ntp
	command.
	Examples — The following command configures a WX switch to use
	NTP server 192.168.1.5:
	WX4400# set ntp server 192.168.1.5
	See Also
	„ clear ntp server on page 119
	„ clear ntp update-intervalon page 120
	„ display ntp on page 134
	„ set ntp on page 158
	„ set ntp update-intervalon page 159
set ntp	Changes how often MSS sends queries to the NTP servers for updates.
update-interval	Syntax — set ntp update-interval seconds
	„ seconds — Number of seconds between queries. You can specify
	from 16 through 1,024 seconds.
	Defaults — The default NTP update interval is 64 seconds.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — The following command changes the NTP update interval
	to 128 seconds:

WX4400# set ntp update-interval 128 success: change accepted.