HP Manager Software manual Set log trace, Mbytes, See Also „ display log config on

set log trace mbytes 589

set log trace	Changes the size of trace log files.
mbytes	Syntax — set log trace mbytes count
	„ count — Size of the trace buffer, in megabytes (MB). You can specify
	from 1 through 50.
	Defaults — The default trace buffer size is 1 MB.
	Access — Enabled.
	History — Introduced in MSS Version 3.0.
	Examples — The following command increases the trace buffer size to
	4 MB:
	WX4400# set log trace mbytes 4
	success: change accepted.

See Also

„display log config on page 584