HP Manager Software manual To a supplicant after a failed authentication

set dot1x quiet-period 491

set dot1x	Sets the number of seconds an WX remains quiet and does not respond
quiet-period	to a supplicant after a failed authentication.

Syntax — set dot1x quiet-period seconds

„seconds — Specify a value between 0 and 65,535.

Defaults — The default is 60 seconds.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — Type the following command to set the quiet period to

90 seconds:

WX4400# set dot1x quiet-period 90 success: dot1x quiet period set to 90.

See Also

„clear dot1x quiet-periodon page 480

„set dot1x wep-rekey-periodon page 496

set dot1x reauth Determines whether the WX switch allows the reauthentication of supplicants (clients).

Syntax — set dot1x reauth {enable disable}

„enable — Permits reauthentication.

„disable — Denies reauthentication.

Defaults — Reauthentication is enabled by default.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — Type the following command to enable reauthentication of supplicants (clients):

WX4400# set dot1x reauth enable success: dot1x reauthentication enabled.