HP Manager Software manual Clear snmp profile, Clear snmp trap, Receiver, Clear snmp usm

122CHAPTER 6: IP SERVICES COMMANDS

	See Also
	„ set snmp notify target on page 162
	„ display snmp notify target on page 189
clear snmp profile	Clears an SNMP notification profile.
	Syntax — clear snmp profile profile-name
	„ profile-name — Name of the notification profile you are clearing.
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 4.0.
	Examples — The following command clears notification profile
	snmpprof_rfdetect:
	WX-1200#clear snmp profile snmpprof_rfdetect
	success: change accepted.
	See Also
	„ set snmp profile on page 167
	„ display snmp notify profile on page 188
clear snmp trap	This command is deprecated in MSS Version 4.0. To clear an SNMP
receiver	notification target (also called trap receiver), see clear snmp notify
	target on page 121.
clear snmp usm	Clears an SNMPv3 user.
	Syntax — clear snmp usm usm-username
	„ usm-username— Name of the SNMPv3 user you want to clear.
	Defaults — None.