HP Manager Software manual Authentication Attributes for Local Users, Filter-id outboundacl.out

248 CHAPTER 7: AAA COMMANDS

Table 47 Authentication Attributes for Local Users (continued)

filter-id	Inbound or outbound	If configured in the WX switch’s local
	ACL to apply to the	database, this attribute can be an
	user.	access control list (ACL) to filter
		outbound or inbound traffic. Use the
		following format:
		filter-id inboundacl.in
		or
		filter-id outboundacl.out
		If you are configuring the attribute on
		a RADIUS server, the value field of
		filter-id can specify up to two ACLs.
		Any of the following are valid:
		filter-id = "Profile=acl1"
		filter-id = "OutboundACL=acl2"
		filter-id = "Profile=acl1
		OutboundACL=acl2"
		(Each example goes on a single line on
		the server.) The format in which to
		specify the values depends on the
		RADIUS server.
		Regardless of whether the attributes
		are defined locally or on a RADIUS
		server, the ACLs must already be
		configured on the WX switch.
idle-timeout	This option is not implemented in the current MSS version.
mobility-profile	Mobility Profile attribute	Name of an existing Mobility Profile,
(network access	for the user. (For more	which can be up to 32 alphanumeric
	information, see set	characters, with no tabs or spaces.
mode only)	mobility-profileon

page 253.)	If the Mobility Profile feature is
	enabled, and a user is assigned the
	name of a Mobility Profile that does
	not exist on the WX switch, the user is
	denied access.