HP Manager Software manual Set snmp, User. SNMPv3 does not use community strings

160CHAPTER 6: IP SERVICES COMMANDS

	See Also
	„ clear ntp server on page 119
	„ clear ntp update-intervalon page 120
	„ display ntp on page 134
	„ set ntp on page 158
	„ set ntp server on page 158
set snmp	Configures a community string for SNMPv1 or SNMPv2c.
community	For SNMPv3, use the set snmp usm command to configure an SNMPv3
	user. SNMPv3 does not use community strings.
	Syntax — set snmp community name comm-string
	access {read-only read-notify notify-only read-write
	notify-read-write}
	„ comm-string— Name of the SNMP community. Specify between 1
	and 32 alphanumeric characters, with no spaces.
	„ read-only— Allows an SNMP management application using the
	string to get (read) object values on the switch but not to set (write)
	them.
	„ read-notify— Allows an SNMP management application using the
	string to get object values on the switch but not to set them. The
	switch can use the string to send notifications.
	„ notify-only— Allows the switch to use the string to send
	notifications.
	„ read-write— Allows an SNMP management application using the
	string to get and set object values on the switch.
	„ notify-read-write— Allows an SNMP management application
	using the string to get and set object values on the switch. The switch
	also can use the string to send notifications.
	Defaults — None.
	Access — Enabled.