HP Manager Software .in, .out, inacl, before, modify, outacl, Examples, set location policy, clear location policy

244CHAPTER 7: AAA COMMANDS

Conditions within a rule are ANDed. All conditions in the rule must match for MSS to take the specified action. If the location policy contains multiple rules, MSS compares the user information to the rules one at a time, in the order the rules appear in the switch’s configuration file, beginning with the rule at the top of the list. MSS continues comparing until a user matches all conditions in a rule or until there are no more rules.

The order of rules in the location policy is important to ensure users are properly granted or denied access. To position rules within the location policy, use before rule-numberand modify rule-numberin the set location policy command, and the clear location policy rule-numbercommand.

When applying security ACLs:

Use inacl inacl-nameto filter traffic that enters the switch from users via an MAP access port or wired authentication port, or from the network via a network port.

Use outacl outacl-nameto filter traffic sent from the switch to users via an MAP access port or wired authentication port, or from the network via a network port.

You can optionally add the suffixes .in and .out to inacl-nameand outacl-nameso that they match the names of security ACLs stored in the local WX database.

Examples — The following command denies network access to all users at *.theirfirm.com, causing them to fail authorization:

WX4400# set location policy deny if user eq *.theirfirm.com

The following command authorizes access to the guest_1 VLAN for all users who are not at *.wodefirm.com:

WX4400# set location policy permit vlan guest_1 if user neq *.wodefirm.com

The following command authorizes users at *.ny.ourfirm.com to access the bld4.tac VLAN instead, and applies the security ACL tac_24 to the traffic they receive:

WX4400# set location policy permit vlan bld4.tac outacl tac_24 if user eq *.ny.ourfirm.com