HP Manager Software manual Syntax set service-profile name beaconed enable disable

set service-profile beacon 355

The WebAAA fallthru authentication type is not supported in conjunction with WPA encryption using preshared keys (PSK) for the same SSID. These options are configurable together but are not compatible. WebAAA traffic is not encrypted, whereas the PSK four-way handshake requires a client to already be authenticated and for encryption to be in place.

Examples — The following command enables PSK authentication for service profile wpa_clients:

WX4400# set service-profile wpa_clients auth-psk enable success: change accepted.

See Also

„display service-profileon page 302

„set service-profileauth-dot1xon page 351

„set service-profilepsk-rawon page 361

„set service-profilewpa-ieon page 370

set service-profileDisables or reenables beaconing of the SSID managed by the service

beaconprofile.

A MAP radio responds to an 802.11 probe any request with only the beaconed SSID(s). For a nonbeaconed SSID, radios respond only to directed 802.11 probe requests that match the nonbeaconed SSID’s SSID string.

When you disable beaconing for an SSID, the radio still sends beacon frames, but the SSID name in the frames is blank.

Syntax — set service-profile name beaconed {enable disable}

„name — Service profile name.

„enable — Enables beaconing of the SSID managed by the service profile.

„disable — Disables beaconing of the SSID managed by the service profile.

Defaults — Beaconing is enabled by default.

Access — Enabled.