HP Manager Software manual Set dot1x timeout, Attempts reauthentication

set dot1x reauth-period 493

set dot1x	Sets the number of seconds that must elapse before the WX switch
reauth-period	attempts reauthentication.

Syntax — set dot1x reauth-period seconds

„seconds — Specify a value between 60 (1 minute) and 1,641,600 (19 days).

Defaults — The default is 3600 seconds (1 hour).

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — Type the following command to set the number of seconds to 100 before reauthentication is attempted:

WX4400# set dot1x reauth-period 100

success: dot1x auth-server timeout set to 100.

See Also

„display dot1x on page 483

„clear dot1x reauth-periodon page 481

set dot1x timeout	Sets the number of seconds that must elapse before the WX switch times
auth-server	out a request to a RADIUS authentication server.

Syntax — set dot1x timeout auth-server seconds

„seconds — Specify a value between 1 and 65,535.

Defaults — The default is 30 seconds.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — Type the following command to set the authentication server timeout to 60 seconds:

WX4400# set dot1x timeout auth-server 60 success: dot1x auth-server timeout set to 60.