HP Manager Software manual Only for the SSIDs that are on the list, Permitted SSIDs

set rfdetect vendor-list 533

	Defaults — The permitted SSID list is empty by default and all SSIDs are
	allowed. However, after you add an entry to the list, MSS allows traffic
	only for the SSIDs that are on the list.
	Access — Enabled.
	History —Introduced in MSS Version 4.0.
	Usage — The permitted SSID list applies only to the WX switch on which
	the list is configured. WX switches do not share permitted SSID lists.
	Examples — The following command adds SSID mycorp to the list of
	permitted SSIDs:
	WX-1200#set rfdetect ssid-list mycorp
	success: ssid mycorp is now in ssid-list.
	See Also
	„ clear rfdetect ssid-liston page 514
	„ display rfdetect ssid-liston page 525
set rfdetect	Adds an entry to the permitted vendor list. The permitted vendor list
vendor-list	specifies the third-party AP or client vendors that are allowed on the
	network. MSS does not list a device as a rogue or interfering device if the
	device’s OUI is in the permitted vendor list.
	Syntax — set rfdetect vendor-list {client ap} mac-addr all
	„	client ap — Specifies whether the entry is for an AP brand or a
		client brand.
	„	mac-addr all — Organizationally Unique Identifier (OUI) to remove.

Defaults — The permitted vendor list is empty by default and all vendors are allowed. However, after you add an entry to the list, MSS allows only the devices whose OUIs are on the list.

Access — Enabled.

History —Introduced in MSS Version 4.0.