HP Manager Software Authentication is enabled, Authentication ports, type the following command

set dot1x bonded-period 487

	Defaults — By default, authentication control for individual wired
	authentication is enabled.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — This command applies only to wired authentication ports.
	Examples — To enable per-port 802.1X authentication on wired
	authentication ports, type the following command:
	WX4400# set dot1x authcontrol enable
	success: dot1x authcontrol enabled.
	See Also
	„ display dot1x on page 483
	„ set dot1x port-controlon page 490
set dot1x	Changes the Bonded Auth™ (bonded authentication) period, which is
bonded-period	the number of seconds MSS retains session information for an
	authenticated machine while waiting for the 802.1X client on the
	machine to start (re)authentication for the user.
	You must set the bonded period to longer than 0 seconds to enable
	bonded authentication.

Syntax — set dot1x bonded-period seconds

„seconds — Number of seconds MSS retains session information for an authenticated machine while waiting for a client to (re)authenticate on the same machine. You can change the bonded authentication period to a value from 1 to 300 seconds.

Defaults — The default bonded period is 0 seconds, which disables the feature.

Access — Enabled.

History —Introduced in MSS Version 3.0.