HP Manager Software manual Clear rfdetect, Attack-list, Removes a MAC address from the attack list

512CHAPTER 17: RF DETECTION COMMANDS

Table 94 RF Detection Commands by Usage (continued)

Type	Command
Permitted SSID List	set rfdetect ssid-liston page 532
	display rfdetect ssid-liston page 525
	clear rfdetect ssid-liston page 514
Client Black List	set rfdetect black-liston page 529
	display rfdetect black-liston page 535
	clear rfdetect black-liston page 513
Attack List	set rfdetect attack-liston page 528
	display rfdetect attack-liston page 534
	clear rfdetect attack-liston page 512
Ignore List	set rfdetect ignore on page 530
	display rfdetect ignore on page 520
	clear rfdetect ignore on page 513
MAP Signatures	set rfdetect signature on page 532
Log Messages	set rfdetect log on page 531

clear rfdetect	Deprecated in MSS Version 3.0. Rogue detection takes place automatically
	in MSS Version 3.0. You do not need to configure RF detection scans.
clear rfdetect	Removes a MAC address from the attack list.
attack-list	Syntax — clear rfdetect attack-list mac-addr
	„ mac-addr— MAC address you want to remove from the attack list.
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 4.0.
	Examples — The following command clears MAC address
	11:22:33:44:55:66 from the attack list:

WX-1200# clear rfdetect attack-list 11:22:33:44:55:66 success: 11:22:33:44:55:66 is no longer in attacklist.