HP Manager Software WX4400# display security acl hits, Syntax rollback security acl acl-nameall

438CHAPTER 12: SECURITY ACL COMMANDS

Examples — The first command sets MSS to sample ACL hits every

15 seconds. The second and third commands display the results. The results show that 916 packets matching security acl_153 were sent since the ACL was mapped.

WX4400# hit-sample-rate 15

WX4400# display security acl info acl_153 ACL information for acl_153

set security acl ip acl_153 (hits #3 916)

---------------------------------------------------------

1.permit IP source IP 20.1.1.1 0.0.0.0 destination IP any enable-hits

WX4400# display security acl hits

ACL hit counters		ACL-name
Index Counter
----- --------------------		-----------
1	0	acl_2
2	0	acl_175
3	916	acl_153

See Also

„display security acl hits on page 430

„display security acl info on page 431

rollback security acl Clears changes made to the security ACL edit buffer since it was last saved. The ACL is rolled back to its state after the last commit security acl command was entered. All uncommitted ACLs in the edit buffer are cleared.

Syntax — rollback security acl {acl-nameall}

„acl-name— Name of an existing security ACL to roll back. ACL names must start with a letter and are case-insensitive.

„all — Rolls back all security ACLs in the edit buffer, clearing all uncommitted ACEs.

Defaults — None.

Access — Enabled.

History — Introduced in MSS Version 3.0.