HP Manager Software Output for display port preference, Syntax display port status port-list

70CHAPTER 4: PORT COMMANDS

Examples — The following command displays the preference settings on all four ports of a WX4400 switch:

WX4400# display port preference Port Preference

===========================================================

1GBIC

2RJ45

3GBIC

4GBIC

Table 13 describes the fields in this display.

Table 13 Output for display port preference

Field	Description
Port	Port number.
Preference	Preference setting:
	„ GBIC — The GBIC (fiber) interface is selected as
	the active interface.
	„ RJ45 — The RJ-45 (copper) interface is selected
	as the active interface.

See Also

„clear port preference on page 64

„set port preference on page 85

display port status Displays configuration and status information for ports.

Syntax — display port status [port-list]

„port-list— List of physical ports. If you do not specify a port list, information is displayed for all ports.

Defaults — None.

Access — All.

History — Introduced in MSS Version 3.0.