HP Manager Software manual Display rfdetect data Output, WX1200# display rfdetect data

display rfdetect data 519

Examples — The following command shows the devices detected by this WX switch during the most recent RF detection scan:

WX1200# display rfdetect data
Total number of entries: 197
Flags: i = infrastructure, a = ad-hoc				= 40-bit WEP, w				= WEP(non-WPA)
c = CCMP, t = TKIP, 1 = 104-bit WEP, 4
BSSID	Vendor	Type	Port/Radio/Ch	Flags		RSSI Age		SSID
00:07:50:d5:cc:91-----------------	-------	----- -------------		------ ---- ---				-----------------
	Cisco	intfr	3/1/6	i----	w	-61	6	r27-cisco1200-2
00:07:50:d5:dc:78	Cisco	intfr	3/1/6	i----	w	-82	6	r116-cisco1200-2
00:09:b7:7b:8a:54	Cisco	intfr	3/1/2	i-----		-57	6	public
00:0a:5e:4b:4a:c0	3Com	intfr	3/1/11	i-----		-57	6
00:0a:5e:4b:4a:c2	3Com	intfr	3/1/11	i-t1--		-86	6	3Comwlan
00:0a:5e:4b:4a:c4	3Com	intfr	3/1/11	ic----		-85	6	3ComWX-ccmp
00:0a:5e:4b:4a:c6	3Com	intfr	3/1/11	i-t---	w	-85	6	3Com-tkip
00:0a:5e:4b:4a:c8	3Com	intfr	3/1/11	i----		-83	6	3Com-voip
00:0a:5e:4b:4a:ca	3Com	intfr	3/1/11	i-----		-85	6	3Com-webaaa
...

Table 96 describes the fields in this display.

Table 96 display rfdetect data Output

Field	Description
BSSID	MAC address of the SSID used by the detected device.
Vendor	Company that manufactures or sells the rogue device.
Type	Classification of the rogue device:
	„ rogue—Wireless device that is not supposed to be on the
	network. The device has an entry in an WX switch’s FDB
	and is therefore on the network.
	„ intfr—Wireless device that is not part of your network but
	is not a rogue. The device does not have an entry in an
	WX switch’s FDB and is not actually on the network, but
	might be causing RF interference with MAP radios.
	„ known—Device that is a legitimate member of the
	network.
Port/Radio/Channel	Port number, radio number, and channel number of the
	radio that detected the rogue. For a Distributed MAP, the
	connection number is labeled dap. (This stands for
	distributed ap.)