HP Manager Software manual Set trace dot1x

566CHAPTER 19: TRACE COMMANDS

set trace dot1x Traces 802.1X sessions.

Syntax — set trace dot1x [mac-addr mac-address] [port port-num] [user username] [level level]

„mac-addrmac-address— Traces a MAC address. Specify a MAC address, using colons to separate the octets (for example, 00:11:22:aa:bb:cc).

„port port-num— Traces on a WX port number.

„user username — Traces a user. Specify a username of up to 80 alphanumeric characters with no spaces.

„level level — Determines the quantity of information included in the output. You can set the level with an integer from 1 to 10, where level 10 provides the most information. Levels 1 through 5 provide user-readable information. If you do not specify a level, level 5 is the default.

Defaults — The default trace level is 5.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — The following command starts a trace for the 802.1X sessions for MAC address 00:01:02:03:04:05:

WX4400# set trace dot1x mac-addr 00:01:02:03:04:05: success: change accepted.

See Also

„clear trace on page 562

„display trace on page 563