HP Manager Software manual Set ip alias, Set ip dns, Aliases as shortcuts in CLI commands

set ip alias 147

set ip alias	Configures an alias, which maps a name to an IP address. You can use
	aliases as shortcuts in CLI commands.

Syntax — set ip alias name ip-addr

„name — String of up to 32 alphanumeric characters, with no spaces.

„ip-addr— IP address in dotted decimal notation.

Defaults — None.

Access — Enabled.

History— Introduced in MSS Version 3.0.

Examples — The following command configures the alias HR1 for IP address 192.168.1.2:

WX4400# set ip alias HR1 192.168.1.2 success: change accepted.

See Also

„clear ip alias on page 116

„display ip alias on page 127

set ip dns Enables or disables DNS on a wireless LAN switch.

Syntax — set ip dns {enable disable}

„enable — Enables DNS.

„disable — Disables DNS.

Defaults — DNS is disabled by default.

Access — Enabled.

History— Introduced in MSS Version 3.0.

Examples — The following command enables DNS on a WX switch:

WX1200# set ip dns enable Start DNS Client