492CHAPTER 15: 802.1X MANAGEMENT COMMANDS

See Also

„display dot1x on page 483

„set dot1x reauth-maxon page 492

„set dot1x reauth-periodon page 493

set dot1x

Sets the number of reauthentication attempts that the WX switch makes

reauth-max

before the supplicant (client) becomes unauthorized.

Syntax set dot1x reauth-max number-of-attempts

„number-of-attemptsSpecify a value between 1 and 10.

Defaults — The default number of reauthentication attempts is 2.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — If the number of reauthentications for a wired authentication client is greater than the maximum number of reauthentications allowed, MSS sends an EAP failure packet to the client and removes the client from the network. However, MSS does not remove a wireless client from the network under these circumstances.

Examples — Type the following command to set the number of authentication attempts to 8:

WX4400# set dot1x reauth-max 8 success: dot1x max reauth set to 8.

See Also

„display dot1x on page 483

„clear dot1x reauth-maxon page 481

Page 492
Image 492
HP Manager Software Before the supplicant client becomes unauthorized, Syntax set dot1x reauth-max number-of-attempts