HP Manager Software manual Display location, Policy, On an WX switch, „ clear location policy on

222CHAPTER 7: AAA COMMANDS

display location	Displays the list of location policy rules that make up the location policy
policy	on an WX switch.
	Syntax — display location policy
	Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — The following command displays the list of location policy rules in the location policy on an WX switch:

WX4400 display location policy

Id Clauses

----------------------------------------------------------------

1)deny if user eq *.theirfirm.com

2)permit vlan guest_1 if vlan neq *.wodefirm.com

3)permit vlan bld4.tac inacl tac_24.in if user eq *.ny.wodefirm.com

	See Also
	„ clear location policy on page 208
	„ set location policy on page 241
display	Displays the named Mobility Profile. If you do not specify a Mobility
mobility-profile	Profile name, this command shows all Mobility Profile names and port
	lists on the WX.

Syntax — display mobility-profile [name]

„name — Name of an existing Mobility Profile.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — The following command displays the Mobility Profile magnolia:

WX1200# display mobility-profile magnolia