HP Manager Software manual Performance, On the switch, Commands on, 802.1X Commands by Usage

15	802.1X MANAGEMENT
	COMMANDS

	Use 802. IEEE X management commands to modify the default settings
	for IEEE 802.1X sessions on an WX switch. For best results, change the
	settings only if you are aware of a problem with the WX switch’s 802.1X
	performance.
	CAUTION: 802.1X parameter settings are global for all SSIDs configured
	on the switch.
Commands by	This chapter presents 802.1X commands alphabetically. Use Table 86 to
Usage	locate commands in this chapter based on their use. For information
	about configuring 802.1X commands for user authentication, see “AAA
	Commands” on page 199.
	Table 86 802.1X Commands by Usage

Type	Command
Wired Authentication Port	set dot1x port-controlon page 490
Control
	clear dot1x port-controlon page 479
	set dot1x authcontrol on page 486
Keys	set dot1x key-txon page 488
	set dot1x tx-periodon page 494
	clear dot1x tx-periodon page 483
	set dot1x wep-rekeyon page 495
	set dot1x wep-rekey-periodon page 496
Bonded Authentication	clear dot1x bonded-periodon page 478
	set dot1x bonded-periodon page 487
Reauthentication	set dot1x reauth on page 491
	set dot1x reauth-maxon page 492