HP Manager Software manual Short-retry, Wmm

350CHAPTER 9: MANAGED ACCESS POINT COMMANDS

set radio-profile	Changes the short retry threshold for the MAP radios in a radio profile.
short-retry	The short retry threshold specifies the number of times a radio can send a
	short unicast frame without receiving an acknowledgment.
	Syntax — set radio-profile name short-retry threshold
	„ name — Radio profile name.
	„ threshold — Number of times the radio can send the same short
	unicast frame. You can enter a value from 1 through 15.
	Defaults — The default short unicast retry threshold for MAP radios is 5
	attempts.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — You must disable all radios that are using a radio profile before
	you can change parameters in the profile. Use the set radio-profile
	mode command.
	Examples — The following command changes the short retry threshold
	for radio profile rp1 to 3:
	WX4400# set radio-profile rp1 short-retry 3
	success: change accepted.
	See Also
	„ display radio-profileon page 298
	„ set radio-profile mode on page 342
	„ set radio-profilelong-retryon page 339
set radio-profile	Disables or reenables Wi-Fi Multimedia (WMM) on the MAP radios in a
wmm	radio profile.
	Syntax — set radio-profile name wmm {enable disable}
	„ name — Radio profile name.
	„ enable — Enables WMM.
	„ disable — Disables WMM.