HP Manager Software manual Set, Command is rejected, Syntax set mobility-domain member ip-addr

set mobility-domain member 265

set	On the seed WX switch, adds a member to the list of Mobility Domain
mobility-domain	members. If the current WX switch is not configured as a seed, this
member	command is rejected.

Syntax — set mobility-domain member ip-addr

„ip-addr— IP address of the Mobility Domain member in dotted decimal notation.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — This command must be entered from the seed WX switch.

Examples — The following commands add three WX switches with the IP addresses 192.168.1.8, 192.168.1.9, and 192.168.1.10 as members of a Mobility Domain whose seed is the current WX switch:

WX4400# set mobility-domain member 192.168.1.8 success: change accepted.

WX4400# set mobility-domain member 192.168.1.9 success: change accepted.

WX4400# set mobility-domain member 192.168.1.10 success: change accepted.

See Also

„clear mobility-domain member on page 262

„display mobility-domain config on page 263

„set mobility-domain mode seed domain-nameon page 267