HP Manager Software manual Syntax set radio-profile name max-rx-lifetime time

340CHAPTER 9: MANAGED ACCESS POINT COMMANDS

„threshold — Number of times the radio can send the same long unicast frame. You can enter a value from 1 through 15.

Defaults — The default long unicast retry threshold for MAP radios is 5 attempts.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — You must disable all radios that are using a radio profile before you can change parameters in the profile. Use the set radio-profile mode command.

Examples — The following command changes the long retry threshold for radio profile rp1 to 8:

WX4400# set radio-profile rp1 long-retry 8 success: change accepted.

See Also

„display radio-profileon page 298

„set radio-profile mode on page 342

„set radio-profileshort-retryon page 350

set radio-profileChanges the maximum receive threshold for the MAP radios in a radio

max-rx-lifetimeprofile. The maximum receive threshold specifies the number of milliseconds that a frame received by a radio can remain in buffer memory.

Syntax — set radio-profile name max-rx-lifetime time

„name — Radio profile name.

„time — Number of milliseconds. You can enter a value from 500 (0.5 second) through 250,000 (250 seconds).

Defaults — The default maximum receive threshold for MAP radios is 2000 ms (2 seconds).

Access — Enabled.

History —Introduced in MSS Version 3.0.