HP Manager Software manual Display rfdetect clients Output, WX1200# display rfdetect Clients

536CHAPTER 17: RF DETECTION COMMANDS

Examples — The following command shows information about all wireless clients detected by an WX switch’s MAPs:

WX1200# display rfdetect		clients
Total number of entries:		30	AP MAC	AP	Port/Radio	NoL Type		Last
Client MAC	Client
-----------------	Vendor			Vendor	/Channel			seen
	------- -----------------			------- ------------- --- -----				----
00:03:7f:bf:16:70	Unknown		Unknown		dap 1/1/6	1	intfr	207
00:04:23:77:e6:e5	Intel		Unknown		dap 1/1/2	1	intfr	155
00:05:5d:79:ce:0f	D-Link		Unknown		dap 1/1/149	1	intfr	87
00:05:5d:7e:96:a7	D-Link		Unknown		dap 1/1/149	1	intfr	117
00:05:5d:7e:96:ce	D-Link		Unknown		dap 1/1/157	1	intfr	162
00:05:5d:84:d1:c5	D-Link		Unknown		dap 1/1/1	1	intfr	52

The following command displays more details about a specific client:

WX1200# display rfdetect clients mac 00:0c:41:63:fd:6d Client Mac Address: 00:0c:41:63:fd:6d, Vendor: Linksys

Port: dap 1, Radio: 1, Channel: 11, RSSI: -82, Rate: 2, Last Seen (secs ago): 84

Bssid: 00:0b:0e:01:02:00, Vendor: 3Com, Type: intfr, Dst: ff:ff:ff:ff:ff:ff

Last Rogue Status Check (secs ago): 3

The first line lists information for the client. The other lines list information about the most recent 802.11 packet detected from the client.

Table 100 and Table 101 describe the fields in these displays.

Table 100 display rfdetect clients Output

Field	Description
Client MAC	MAC address of the client.
Client Vendor	Company that manufactures or sells the client.
AP MAC	MAC address of the radio with which the rogue client is
	associated.
AP Vendor	Company that manufactures or sells the AP with which
	the rogue client is associated.
Port/Radio/Channel	Port number, radio number, and channel number of the
	radio that detected the rogue. For a Distributed MAP,
	the connection number is labeled dap. (This stands for
	distributed ap.)