HP Manager Software Clients from being able to use rogue access points, With MAP radios, Radprof3

set radio-profile countermeasures 337

set	CAUTION: Countermeasures affect wireless service on a radio. When a
radio-profile	MAP radio is sending countermeasures, the radio is disabled for use by
countermeasures	network traffic, until the radio finishes sending the countermeasures.
	Enables or disables countermeasures for on the MAP radios managed by
	a radio profile. Countermeasures are packets sent by a radio to prevent
	clients from being able to use rogue access points.
	MAP radios can also issue countermeasures against interfering devices.
	An interfering device is not part of the network but also is not a rogue.
	No client connected to the device has been detected communicating with
	any network entity listed in the forwarding database (FDD) of any WX
	switch in the Mobility Domain. Although the interfering device is not
	connected to your network, the device might be causing RF interference
	with MAP radios.
	Syntax — set radio-profile name countermeasures { all rogue }
	„ name — Radio profile name.
	„ all — Configures radios to attack rogues and interfering devices.
	„ rogue — Configures radios to attack rogues only.
	Defaults — Countermeasures are disabled by default.
	Access — Enabled.
	History —Introduced in MSS Version 4.0.
	Examples — The following command enables countermeasures in radio
	profile radprof3 for rogues only:
	WX-1200#set radio-profile radprof3 countermeasures rogue
	success: change accepted.
	The following command disables countermeasures in radio profile
	radprof3:

WX-1200# clear radio-profile radprof3 countermeasures success: change accepted.