HP Manager Software manual Set ap dap radio auto-tune max- retransmissions

318CHAPTER 9: MANAGED ACCESS POINT COMMANDS

Access — Enabled.

History —Introduced in MSS Version 3.0. MSS Version 4.0 added auto option for configuration of the MAP configuration template.

Examples — The following command sets the maximum power that RF Auto-Tuning can set on radio 1 on the MAP access point on port 6 to 12 dBm.

WX1200# set ap 6 radio 1 auto-tunemax-power 12 success: change accepted.

See Also

„set {ap dap} radio auto-tune max- retransmissions on page 318

„set radio-profileauto-tunepower-backoff- timer on page 333

„set radio-profileauto-tunepower-configon page 334

„set radio-profileauto-tunepower-intervalon page 335

set {ap dap} radio auto-tune max- retransmissions

Sets the maximum percentage of client retransmissions a radio can experience before RF Auto-Tuning considers changing the channel on the radio. A high percentage of retransmissions is a symptom of interference on the channel.

Syntax — set {ap port-list dap (dap-num auto)}

radio {1 2} auto-tune max-retransmissions retransmissions

„ap port-list— List of ports connected to the MAP access points on which to set the maximum retransmissions.

„dap dap-num— Number of a Distributed MAP on which to set the maximum retransmissions.

„dap auto — Sets the maximum retransmissions for radios configured by the MAP configuration template. (See set dap auto on page 306.)

„radio 1 — Radio 1 of the MAP.

„radio 2 — Radio 2 of the MAP. (This option does not apply to single-radio models.)

„retransmissions — Percentage of packets that can result in retransmissions without resulting in a channel change. You can specify from 1 to 100.