HP Manager Software Path to the STP root bridge, on one Vlan or all VLANs, Ports, On Vlan mauve

396CHAPTER 10: STP COMMANDS

set spantree	Changes the priority of a network port or ports for selection as part of
portvlanpri	the path to the STP root bridge, on one VLAN or all VLANs.
	Syntax — set spantree portvlanpri
	port-list priority value {all vlan vlan-id}
	„ port-list— List of ports. MSS changes the priority on the specified
	ports.
	„ priority value — Priority value. You can specify a value from 0
	(highest priority) through 255 (lowest priority).
	„ all — Changes the priority on all VLANs.
	„ vlan vlan-id— VLAN name or number. MSS changes the priority on
	only the specified VLAN.
	Defaults — The default STP priority for all network ports is 128.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — The following command sets the priority of ports 3 and 4 to
	48 on VLAN mauve:
	WX1200# set spantree portvlanpri 3-4 priority 48 vlan mauve
	success: change accepted.

See Also

„clear spantree portpri on page 373

„clear spantree portvlanpri on page 374

„display spantree on page 376

„set spantree portpri on page 394