HP Manager Software manual Switch has booted

192CHAPTER 6: IP SERVICES COMMANDS

Table 41 Output for display SNMP status (continued)

Field	Description
SNMP minimum security	Lowest (least secure) security level set on the switch:
	„ authenticated—SNMP message exchanges are
	authenticated but are not encrypted.
	„ auth-req-unsec-notify—SNMP message exchanges
	are authenticated but are not encrypted, and
	notifications are neither authenticated nor
	encrypted.
	„ encrypted—SNMP message exchanges are
	authenticated and encrypted.
	„ unsecured—SNMP message exchanges are not
	secure.
System Name	String configured by the set system name command.
System location	String configured by the set system location
	command.
System contact	String configured by the set system contact
	command.
SNMP engine ID	Unique ID of this SNMP engine.
SNMP engine boots	Number of times the SNMP engine has booted. This
	number is at least as great as the number of times the
	switch has booted.
SNMP engine time	Number of seconds since the SNMP engine was
	rebooted.
SNMP max message size	Maximum length, in bytes, of SNMP messages sent by
	this SNMP engine.

See Also

„set snmp community on page 160

„set snmp notify target on page 162

„set snmp profile on page 167

„set snmp protocol on page 172

„set snmp security on page 173

„set snmp usm on page 174

„display snmp community on page 186

„display snmp counters on page 187

„display snmp notify profile on page 188