HP Manager Software manual Set radius proxy, Port, „ clear radius proxy client on

set radius proxy port 471

	WX-1200#set radius proxy client address 10.20.20.9 key
	radkey1
	success: change accepted.
	See Also
	„ clear radius proxy client on page 466
	„ set authentication proxy on page 238
	„ set radius proxy port on page 471
set radius proxy	Configures the WX port connected to a third-party AP as a RADIUS proxy
port	for the SSID supported by the AP.
	Syntax — set radius proxy port port-list[tag tag-value]
	ssid ssid-name
	„ port-list— WX port(s) connected to the third-party AP.
	„ tag tag-value— 802.1Q tag value in packets sent by the
	third-party AP for the SSID.
	„ ssid ssid-name— SSID supported by the third-party AP.
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS 4.0.
	Usage — AAA for third-party AP users has additional configuration
	requirements. See the “Configuring AAA for Users of Third-Party APs”
	section in the “Configuring AAA for Network Users” chapter of the
	Wireless LAN Switch and Controller Configuration Guide.
	Enter a separate command for each SSID, and its tag value, you want the
	WX to support.
	Examples — The following command maps SSID mycorp to packets
	received on port 3 or 4, using 802.1Q tag value 104:

WX-1200# set radius proxy port 3-4 tag 104 ssid mycorp success: change accepted.