HP Manager Software manual Set location policy

set location policy 243

„user operator user-glob— Username and condition by which to determine if the location policy rule applies. Replace operator with one of the following operands:

„eq — Applies the location policy rule to all usernames matching user-glob.

„neq — Applies the location policy rule to all usernames not matching user-glob.

For user-glob, specify a username, use the double-asterisk wildcard character (**) to specify all usernames, or use the single-asterisk wildcard character (*) to specify a set of usernames up to or following the first delimiter character, either an at sign (@) or a period (.). (For details, see “User Globs” on page 26.)

„before rule-number— Inserts the new location policy rule in front of another rule in the location policy. Specify the number of the existing location policy rule. (To determine the number, use the display location policy command.)

„modify rule-number— Replaces the rule in the location policy with the new rule. Specify the number of the existing location policy rule. (To determine the number, use the display location policy command.)

„port port-list— List of physical port(s) by which to determine if the location policy rule applies.

Defaults — By default, users are permitted VLAN access and assigned security ACLs according to the VLAN-Name and Filter-Id attributes applied to the users during normal authentication and authorization.

Access — Enabled.

History —Introduced in MSS Version 3.0. SSID option added in MSS Version 3.2.

Usage — Only a single location policy is allowed per WX switch. Once configured, the location policy becomes effective immediately. To disable location policy operation, use the clear location policy command.