HP Manager Software manual Describes the fields of display system output, Display system output

	display system 43
System IP:	192.168.12.7
System MAC:	00:0B:0E:00:04:30

===============================================================================

Boot Time:	2003-11-07 15:45:49
Uptime:	13 days 04:29:10

===============================================================================

Fan status: fan1 OK fan2 OK fan3 OK

Temperature: temp1 ok temp2 ok temp3 ok

PSU Status: Lower Power Supply DC ok AC ok Upper Power Supply missing

Memory: 97.04/744.03 (13%)

Total Power Over Ethernet : 29.000

===============================================================================

Table 7 describes the fields of display system output.

Table 7 display system output

Field	Description
Product Name	Switch model number.
System Name	System name (factory default, or optionally configured
	with set system name).
System Countrycode	Country-specific 802.11 code required for MAP operation
	(configured with set system countrycode).
System Location	Record of the WX switch’s physical location (optionally
	configured with set system location).
System Contact	Contact information about the system administrator or
	another person to contact about the system (optionally
	configured with set system contact).
System IP	Common interface, source, and default IP address for the
	device, in dotted decimal notation (configured with set
	system ip-address).
System MAC	WX switch’s media access control (MAC) machine address
	set at the factory, in 6-byte hexadecimal format.
License	License level installed on the WX switch (if applicable).
Boot Time	Date and time of the last system reboot.
Uptime	Number of days, hours, minutes, and seconds that the WX
	has been operating since its last restart.