HP Manager Software antennatype, set {ap | dap} radio, set {ap | dap} name Changes an MAP name

set {ap dap} name 315

set {ap dap} name Changes an MAP name.

Syntax — set {ap port-list dap dap-num}name name

„ap port-list— List of ports connected to the MAP access point to rename.

„dap dap-num— Number of a Distributed MAP to rename.

„name — Alphanumeric string of up to 16 characters, with no spaces.

Defaults — The default name of a directly attached MAP is based on the port number of the MAP access port attached to the MAP. For example, the default name for a MAP on MAP access port 1 is MAP01. The default name of a Distributed MAP is based on the number you assign to it when you configure the connection. For example, the default name for Distributed MAP 1 is DMP01.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — The following command changes the name of the MAP access point on port 1 to techpubs:

WX1200# set ap 1 name techpubs success: change accepted.

See Also

„“display {ap dap} config” on page 277

set {ap dap} radio Sets the model number for an external antenna. antennatype

Syntax — set {ap port-list dap dap-num}radio

{1 antennatype ANT1060 ANT1120 ANT1180 internal} {2 antennatype ANT5060 ANT5120 ANT5180 internal}

{{12} antennatype ANT3C591 ANT3C592 ANT3C597 ANT3C598 internal}

„ap port-list— List of ports connected to the MAP access points on which to set the channel.

„dap dap-num— Number of a Distributed MAP on which to set the channel.