HP Manager Software manual See Also „ clear port name on „ display port status on

set port negotiation 83

Examples — The following command sets the name of port 7 to adminpool:

WX1200# set port 7 name adminpool success: change accepted.

See Also

„clear port name on page 64

„display port status on page 70

set port negotiation Disables or reenables autonegotiation on gigabit Ethernet or 10/100 Ethernet ports.

Syntax — set port negotiation port-list{enable disable}

„port-list— List of physical ports. MSS disables or reenables autonegotiation on all the specified ports.

„enable — Enables autonegotiation on the specified ports.

„disable — Disables autonegotiation on the specified ports.

Defaults — Autonegotiation is enabled on all Ethernet ports by default.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — WX1200 10/100 Ethernet ports support half-duplex and full-duplex operation.

Examples — The following command disables autonegotiation on ports

3 and 5:

WX1200# set port negotiation 3,5 disable

The following command enables autonegotiation on port 2:

WX1200# set port negotiation 2 enable