HP Manager Software manual „ set dap on, „ set port type ap on „ set ap dap bias on

display {ap dap} config 279

Table 52 Output for display ap config (continued)

Field	Description
mode	Radio state:
	„	Enabled
	„	Disabled
channel	Channel number.
antennatype	External antenna model, if applicable.
tx pwr	Transmit power, in dBm.
profile	Radio profile that manages the radio. Until you assign the
	radio to a radio profile, MSS assigns the radio to the default
	radio profile.
auto-tune	Maximum power level the RF Auto-Tuning feature can set on
max-power	the radio.
	„ The value default means RF Auto-Tuning can set the
		power up to the maximum level allowed for the country
		of operation.
	„ A specific numeric value means you or another
		administrator set the maximum value.
auto-tune	Minimum data rate the radio must maintain for associated
min-client-rate	clients. When RF Auto-Tuning is enabled, the radio can
	temporarily increase its power to maintain the data rate with
	an associated client.
auto-tune	Maximum percentage of packets that can be retransmitted
max-retransmissions	by a client before RF Auto-Tuning increases power.

Note: Only packets that are received twice by the MAP are counted as retransmissions. If a client retransmits a packet but the MAP receives only a single copy of the packet, the packet is not counted as a retransmission.

See Also

„display dap connection on page 294

„display dap global on page 295

„display dap unconfigured on page 297

„display radio-profileon page 298

„set dap on page 77

„set port type ap on page 87

„set {ap dap} bias on page 310