HP Manager Software manual Create, Syntax create

596CHAPTER 22: BOOT PROMPT COMMANDS

„delete on page 597

„display on page 599

„next on page 603

create	Creates a new boot profile. (For information about boot profiles, see
	display on page 599.)
	Syntax — create
	Defaults — The new boot profile has the same settings as the currently
	active boot profile by default.
	Access — Boot prompt.
	History —Introduced in MSS Version 3.0.
	Usage — A WX switch can have up to four boot profiles. The boot
	profiles are stored in slots, numbered 0 through 3. When you create a
	new profile, the system uses the next available slot for the profile. If all
	four slots already contain profiles and you try to create a fifth profile, the
	switch displays a message advising you to change one of the existing
	profiles instead.
	To make a new boot profile the currently active boot profile, use the next
	command. To change boot parameter settings, use the change
	command.
	Examples — The following command creates a new boot profile in slot 1
	on a WX switch that currently has only one boot profile, in slot 0:
	boot> create
	BOOT Index:	1
	BOOT TYPE:	c
	DEVICE:	boot1:
	FILENAME:	default
	FLAGS:	00000000
	OPTIONS:	run=nos;boot=0

See Also

„change on page 595

„delete on page 597