HP Manager Software Defaults None, WX4400# set mac-user 010203040506 attr filter-id acl-03.in

set mac-user attr 251

Table 47 Authentication Attributes for Local Users (continued)

url	URL to which the user is	Web URL, in standard format. For
(network access	redirected after	example:
	successful WebAAA.	http://www.example.com
mode only)
		You must include the http:// portion.
		You can dynamically include any of
		the variables in hte URL string:
		„	$u—Username
		„	$v—VLAN
		„	$s—SSID
		„	$p—Service profile name
		To use the literal character $ or ?, use
		the following:
		„	$$
		„	$q
vlan-name	Virtual LAN (VLAN)	Name of a VLAN that you want the
(network access	assignment.	user to use. The VLAN must be
mode only)	On some RADIUS	configured on an WX switch within
		the Mobility Domain to which this WX
	servers, you might need
	to use the standard	switch belongs.

RADIUS attribute Tunnel-Pvt-Group-ID, instead of VLAN-Name.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — To change the value of an attribute, enter set mac-user attr with the new value. To delete an attribute, use clear mac-user attr.

You cannot set the Filter-ID attribute in the local database.

Examples — The following command assigns input access control list (ACL) acl-03to filter the packets from a user at MAC address 01:02:03:04:05:06:

WX4400# set mac-user 01:02:03:04:05:06 attr filter-id acl-03.in

success: change accepted.