HP Manager Software manual Output for display ap status

display {ap dap} status 289

Table 57 Output for display ap status (continued)

Field	Description
AP model	MAP access point model number.
manufacturer	Company that made the MAP access point.
name	MAP access point name.
Link	Status of this link with the MAP access point and the MAP
	port at the other end of the link. The status can be up or
	down.
MAP port	MAP port number connected to this WX port.
State	State of the MAP:

„

„

„

„

„

init — The MAP has been recognized by the WX but has not yet begun booting.

booting — The MAP has asked the WX for a boot image.

image downloading — The MAP is receiving a boot image from the WX.

image downloaded — The MAP has received a boot image from the WX and is booting.

configuring — The MAP has booted and is ready to receive or is already receiving configuration parameters from the WX.

„operational — The MAP has received configuration parameters for one or more radios and is ready to accept client connections.

„configure failure — One or more of the radio parameters received from the WX is invalid.

„

„

For Distributed MAPs, this field also indicates whether the MAP’s management traffic with the WX is encrypted, and whether the MAP’s fingerprint has been verified on the WX:

not encrypted—The management session is not encrypted.

encrypted but fingerprint not verified—The MAP’s management traffic is encrypted, but the MAP’s fingerprint has not been verified in MSS.

„encrypted and verified—The MAP’s management traffic is encrypted and the MAP’s fingerprint has been verified in MSS.